Hey Everybody,I'm always glad you're here. To ingeminate one of the homeless guys back in my old neighborhood whenever something goes wrong. "help is on the way!"In any event:I have a trial version of Vegas Platinum Edition 8.0. Build 122. I undergo some data I imported from a DVD camcorder disc and am now trying to turn into a movie in MPEG-2 DVD PAL change. Every time I try to compile the movie at some point--whenever I go out of the room--the render process causes my computer to completely change state drink. Because I'm out of the dwell. I'm not sure if there are any error messages how the computer shuts drink etc. But when I come approve the computer is definitely in the off state--to be needlessly technical--and when I kick it up it boots up just as though I had shut it down normally. Based on the length of the MPG files Vegas does bring home the bacon to put out (to an external. 500GB. USB 2.0 hard control no less) the system shuts down at random intervals: some of the movies are almost beat length at two minutes and dress others only render for 30 seconds and then depart. I have cater management turned off on my computer so I disbelieve it's a inspect of the system just going into hibernation or some other power-saving mode. (I've considered setting gremlin traps but I don't know where to purchase them.) I'm thinking about trying it one more time--and setting my camera up to preserve the check so that I can look back and see what's going on. This one perplexes the lay; I'd rather not kick it (whatever that means; jet lag and coffee are killing me slowly. I think). Until then--Sincerest regards,Luke
Nope: no over-clocking; all fans purring. My computer--a laptop with a standard desktop-class Pentium IV--does be to run hot though. I'll try it again tonight with the forge propped up off the delay to see if it works any exceed. (That usually worked to keep it cool approve in the States.)--Luke
Just a thought: undergo you ever run a RAM evaluate???Some systems work OK when not pushed too hard but when a huge program desire a video editor comes along and hits a bad spot way up in the RAM they'll roll over and die. You can sight remove diagnostic programs on the web that'll analyse all the bits in your RAM chips.
Could be a driver air could be a hard drive issue. Try rendering to your internal control or another driver. I've had driver issues with the new generation western digitals and have actually had to jumper them approve to 150 and not 300 when I did that my crashes went away. But it could be alter find a alter monitoring software and look at that also move off any processes you don't need. I usually will act a new user in windows to work if I have a lot of cast aside on my machine that loads.
I have a two year old Alienware laptop that in the last few months has been running hotter than usual and turns itself off (with no warning) after 30 mins or so heavy use. I bought a cheap Akasa cooling base a couple of months ago and that works a treat - comfort runs hot but just not so hot it falls over. I had all but forgotten about the problem until I took my son to injure a commercial in the north east (UK) last week. I took the laptop for him to compete his games in the evening (yeah yeah - while I was in the bar!) but he came down on the first night to say it had just change state itself off. What hadn't I taken? The cooling base. Brought it domiciliate on Sunday and it has been running a deep virus examine on a terabyte of external control data - good as gold. Wouldn't surprise me if you told me you had an Alienware laptop. Luke and that this was your problem. act us posted.
Yeah that's one of the hottest configurations ever put in a laptop. (I have one.) Slowly over a long period of time the fans ordain drink in dust which acts as an insulator to change things up change surface more. I've thought about taking exploit in for service just to undergo them clean and brush it out. Never done it...
WalMart sells some really nice little fans with metal shrouds (blade adjoin) for $5.00 (your determine may differ). I have not looked for the fans lately so they may not still have them. For a test. I would prop up the laptop by placing 2" or so high blocks under the four corners. Then I would get a small fan to breathe out under and over the laptop. Rendering in Vegas is a anguish evaluate for your laptop. Since the get takes a relatively long time without you needing to be typing on the computer the above suggestion may be worth a try. Most any small fan ordain do.
Yup. I've only run one successful evaluate but--it looks desire alter was the culprit: I propped the laptop up on bubble blocks and--wallah! The movie renders all the way through. I haven't added any new fans to the forge (which is a Toshiba Satellite by the way--the exact copy be of which I can't bequeath off the top of my continue). However sadly there are no WallMarts near where I am. There are a lot of Japanese camera shops; I might forbid in one soon. Sure enough. I do bequeath it shutting drink some number of months ago when I tried to compete Sim City 4 with the thing sitting on my lap (my legs nearly caught fire just before it did as I remember--or at least it felt like they would). The air intakes are getting quite clogged with dust. I've noticed now that I'm moving and have had cause to turn the chassis over and take a look at the underside. I was imagining myself using compressed air to blow the dust into the machine--out of the grill to act it from completely clogging up but--I evaluate you can all see where I worry that might bring about. I wonder--how else to get the dirt out of there?I'll try a damp create from raw material next before I do anything drastic. I don't think it's a driver issue. I've not had a difficult measure writing large amounts of data to either hard control; it's only when I'm beating the CPU to death with zeros and ones from Vegas that the system goes drink. No RAM evaluate has been run: couldn't find a suitable application in the few spare moments that I've had (although. I did transfer the application from Microsoft designed just for such a diagnostic. I don't undergo any blank CDs now however to destroy the kick plough it relies on). Nonetheless the good ol' Appalachian fix has worked: just putting the thing up on blocks! Next all we need to do is find a way to bring home the bacon duct attach into the fix and we'll undergo a story. <DThanks to you all for your help.--Luke
Dear Luke,I am happy that you undergo a solution. I advise that you power off the unit then use a good vacumn cleaner (with the necessary attachments) to alter all of the intake air vents that you can find. This may help. If not it should not do any damage.
Forex Groups - Tips on Trading
Related article:
http://www.dvinfo.net/conf/showthread.php?t=103549
comments | Add comment | Report as Spam
|